Meter for internal doors in 5 steps

When we renew a room, its final appearance is influenced, in a very large proportion, with the internal doors chosen. In addition to selecting the perfect material and color, an essential passage for harmonious integration in the appearance of the room is the correct performance of the measurements for the internal doors. Together with this, the assembly plays a special role, which requires specific information and skills by those who make it.

Below we will promptly present both the way in which the measurements for the internal doors are carried out correctly, and the phases of the assembly. Of course, for better information, the specialists of Romanian furnishings are always at your disposal.

How to correctly measure the size of the internal door?

We must mention from the beginning that the same unit of measurement must be maintained for all measurements. Usually, the internal doors are measured in centimeters or millimeters (the most common units of measurement used in this case).

The measurement is made on the gray stage, when the excavation is launched and the walls are plastered. If this operation is performed by the assembly team, the craftsman who works on the building is advisable to discuss and stay in touch with it. To check the differences in the probability, the vacuum of the door is measured on width and height in three points. The thickness of the wall is also measured, in 6 points, taking into account the highest share (in the case of the adjustable heel).

The internal doors have the opening inside the room, but if you want the opening, it is necessary to specify it for measurement. Usually, the combination of materials is performed inside the room (10 mm inwards). Example of bathroom: we will enter the room with the parquet, in the bathroom, where the thickness of the wall ends with the parquet with 10 mm; There the parquet will be combined with the tiles, so that the break goes down under the thickness of the 40 mm doors sheet.

How is the internal door correctly mounted?

Once the process of doors for the doors are correctly performed, the next step must be installed. Both the sheets and the heels are sealed, wrapped and captured with clamps. The hinges and the rest of the accessories are under the door sheet. After revealing each void of the door, the components are carefully unmistaked, without cutting with the cutter because in this way the products can be scratched.

Then follows the actual assembly:

• The frame is assembled: the horizontal crossing, the two verticals in the pieces and the accessories in the box;
• The hinges are then inserted on the heel and on the wire on the door sheet;
• The cable frame, in place, is seized, focused and then carefully mounted the door sheet for the opening test test;
• The distance from the handle is positioned and the polyurethane foam is applied (it is inserted punctually, next to the feathers);
• After the correction, the feathers are removed and completed the possible holes, even with polyurethane foam, then mount the windowsill from the outside.

Recommendation of specialists: The type of fixation is 24 hours during the summer and 48 hours in winter.

ROM DECOR – services dedicated by measurements for the doors, performed by experts. We also offer the installation

If, however, the idea of ​​the measurements for the doors seems to be difficult to reach and not dare to do it alone, the team of specialists of Roma decorations offers dedicated services, made very carefully.

By opting for our assembly services authorized by Porta, you will be able to automatically benefit from the doors measuring services. The latter will be made by experts, within a relatively short time from the request, only in your presence. Following the realization of all the necessary measurements, the team of Roma decorations can find relevant suggestions and exhortations, for a construction as in the book.

So, as soon as you chose the ideal internal door model, it is time to put your mathematical talents to work and go to measure. If you are wondering if it would no longer be correct to measure first and then, depending on them, to choose the product, we assure you that it is not necessary: ​​Rom decorations offers personalized internal doors, adapted to the specific needs of customers, so the final result will be according to expectations.